INTRODUCTION
This project shows a simulated book self-borrowing system based on UNIHIKER K10, which mainly uses the face recognition function and RFID book scanning function of the K10 board.
By using the face recognition function, it can realize certain artificial intelligence function easily and quickly. The RFID module can recognize different book information, and the screen and sound of the K10 can be corresponded to show the portability and flexibility of the integration of multiple modules of the UNIHIKER.
OPERATING INSTRUCTIONS
(1) The first step is to press button A to enter the face login mode. Using the face detection function of K10, once a face card is detected, a square box will appear on the screen outlining the face and automatically logging in to the book borrowing interface. If no face is detected within ten seconds, it will automatically exit and return to the start interface.
(2) After entering the book borrowing interface, place the book on the RFID module. When the RFID module reads the book, the corresponding book cover will be displayed on the K10 screen along with the book's title. You can continue to scan new books to borrow more, but books that have already been borrowed cannot be borrowed again.
(3) If no new book is detected for more than ten seconds, it will display a message indicating successful logout and re-enter the start interface.
Due to the large number of project images and audio files, all materials should be copied onto a TF card using a card reader, and then the TF card should be inserted into the K10.
Connect the k10 to the button module and the RFID module as follows.
For the button module, connect it to the P0 port of the K10
For the RFID module, connect it to the I2C interface of the K10
3D files.zip 
